Stainless Steel ER 310


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Mn Si Cr Ni S P Mo Cu
ER 310 0.08-0.15 1.0-2.5 0.30-0.65 25-28 20-22.5 0.03 max 0.03 max 0.75 max 0.75 max

Alloy ER 310 is used for the welding of stainless steels of similar composition in wrought or cast form. The weld deposit is fully austenitic and calls for low heat during welding. This filler metal can be used for dissimilar welding.

Typical Mechanical Properties

Material Ultimate Tensile Strength Offset Yield Strength 0.2 % Elongation (%)
psi MPa psi MPa
ER 310 88,450 610 69,600 480 41


Availability
Alloy ER 310 is a Stainless Steel TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.

Specifications
AWS 5.9
ASME SFA 5.9
AWS ER 310
UNS S31080

Return to Main Welding Page

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.