Nickel Welding Alloy AMS 5675

Technical Data Sheet


Chemical Composition Limits
Weight% Ni+Co Cr Ti Mn Fe Si S Co Cu
AMS 5675 67.00 min 14-17 2.5-3.5 2.0-2.75 10.0 max 0.35 max 0.015 max 1.00 max 0.50 max

Alloy 92 (AMS 5675) is a nickel base alloy which was designed especially for gas tungsten arc and gas metal arc welding of dissimilar combinations of high nickel alloys and austenitic and ferritic steels.

Used on

FM 92 is used for dissimilar metal welding of austenitic and ferritic stainless alloys to each other and to high nickel alloys. Applications include Ni200 and M60 and M67 to stainless steels and joining stainless steels to carbon steels. Use argon gas shielding and ultra clean conditions for welding

Cross-Reference of Specifications MSRR 9500/9
AMS 5675 Nickel Alloy, Corrosion and Heat Resistant Welding Wire
UNS N07092
FM 92
70Ni 15.5Cr 7Fe 3.0Ti 2.4Mn
MIL-E 22200/3 Type RN6A
(Commercial grade AWS A5.14 ENi Cr Fe-6
Inconel 92 (trademark)
Availability Ex stock MIG spools and TIG rods

For all stock availability contact Sales.
Weld Properties

Hardness: 160 - 200VN
Proof stress (0.2% offset): 400 Mpa
Tensile strength: 640 Mpa
Elongation: > 30%
RA: > 55%

Return to Main Welding Page

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.