Nickel Alloy 205


Technical Data Sheet

 

Chemical Composition Limits
Weight% Ni Mg Ti Cu Fe C Si S Mn
Nickel 205 99.0 min 0.01 - 0.08 0.01 - 0.05 0.15 max 0.20 max 0.15 max 0.15 max 0.008 max 0.35 max

Nickel 205 is a wrought nickel similar to Nickel 200 but with compositional adjustments to enhance the performance in electronic applications. It is most commonly used for the anodes and grids of electronic valves, magnetostrictive transducers, lead wires, transistor housings and battery cases.

Typical Mechanical Properties

Material Tensile Strength Yield Strength (0.2% Offset) Elongation in 2" (%)
psi MPa psi MPa
Nickel 205 50,000 345 13,000 90 45
Mechanical Properties in the Annealed Condition

Availability
Nickel 205 (UNS N02205) is available in Sheet, Strip amd Wire. For all stock availability contact Sales.

Specifications
UNS N02201
BS 3072, BS 3073, BS 3074, BS 3075 and BS 3076 (NA12)
ASTM B160, ASTM B162, ASTM B 163, ASTM B 725 and ASTM B 730
SAE AMS 5553 Sheet, Strip
ASME SB-160, ASME SB-163 and Boiler Code Sections III, VIII, IV
DIN 17740, 17750, 17751, 17752, 17753 and 17754
Werkstoff Nr. 2.4061 and WS2.4068

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.