Nickel Alloy 617/ Inconel 617 ®


Technical Data Sheet

 

Chemical Composition Limits
Weight% Ni Cr Mo Fe S C Mn B Cu Ti Co P Si Al
Alloy 617 44.5
min
20 - 24 8 - 10 3 max 0.15
max
0.05 - 0.15 1 max 0.006 0.50
max
0.60
max
10 - 15 0.15 max 1 max 0.8 -1 .5

Alloy 617/ Inconel 617 ®(UNS N06617) is a nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of high-temperature strength and oxidation resistance. The high nickel and chromium contents make the alloy 617 resistant to a variety of both reducing and oxidising environments, while the aluminium with the chromium provides oxidation resistance at high temperatures. Those elements with the molybdenum enable the alloy to withstand many wet corrosive environments.

Typical Mechanical Properties

 

Material Form Condition Yield Strength Tensile Strength Elongation % Reduction of Area Hardness, BHN
ksi MPa ksi MPa
Alloy 617 Bar Solution Annealed 46.1 318 111.5 769 56 50 181
Alloy 617 Sheet Solution Annealed 50.9 351 109.5 755 58 - 173
Alloy 617 Plate Solution Annealed 46.7 322 106.5 734 62 56 172

Availability
Alloy 617 (Inconel 617 ®) is available in Round Bar, Flat Bar, Forging Stock, Extruded Section, Pipe, Tube, Plate, Sheet, Strip, Wire and Welding Wire. Contact Sales for further availability.

Specifications
UNS N06617
ASTM B 166
WS 2.4663a
ASME SB-166, Boiler Code Sections I, VIII,
SAE AMS 5887, SAE AMS 5888 and SAE AMS 5889
Inconel 617 ®

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.