Nickel Alloy PE16/ Nimonic PE16®


Technical Data Sheet

Chemical Composition Limits
Weight% Ni + Co Cr Mo Fe Al Ti C
PE16 42-45 15.5-17.5 2.8-3.8 Rem 1.1-1.3 1.1-1.3 0.04-0.08
Weight% Cu Si Mn Co B Zr S
PE16 0.5 max 0.5 max 0.2 max 2.0 max 0.005 max 0.02-0.04 0.015 max

Alloy PE16 is a precipitation-hardenable nickel-iron-chromium alloy with an addition of molybdenum for solid-solution strengthening. PE16 has good strength and oxidation resistance at temperature to about 1380ºF (750ºC). Alloy PE16 is designed to provide a precipitation-hardened material having excellent hot-working, cold-working and welding characteristics. PE16 is commonly used in gas-turbines components and in nuclear reactors.

Typical Mechanical Properties

Material Condition 20°C 0.2 % Proof Stress MPa Tensile Strength MPa Elongation % Reduction of Area %
PE16 Bar Heat Treatment 2h/1040°C/AC +2h 800°C/AC + 16/700°C/AC 525 880 37 54
PE16 Bar Heat Treatment 4h/1040°C/AC + 1h 900°C/AC + 8h/750°C / AC 450 830 29 55

Availability
PE16 is available in Sheet, Plate, Round Bar, Flat Bar, Forging Stock, Extruded Section and Welding Wire. For all stock availability contact Sales.

Specifications
BS HR55
BS HR207
AFNOR NW 11 AC
MSRR 7952
Trade Name - NIMONIC PE16

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.