 |
|
 |
Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys | Magnesium | Nickel Alloys | Plastic | Titanium Alloys
|
Part Number WS 1.4057 |
|
Hardenable Stainless Steel without sulfur |
|||||||||
|
Chemical Composition Limits |
|||||||||
| Weight % | C | Si | Mn | P | S | Cr | Mo | Ni | Fe |
| CHRONIFER M-4057 | 0.12-0.22 | 1.00 max | 1.50 max | 0.040 max | 0.015 max | 15.50-17.00 | 1.50-2.50 | 2.00-2.50 | Rem |
|
Other Chemically similar Specifications |
|||||||||
| Weight % | C | Si | Mn | P | S | Cr | Mo | Ni | Fe |
| WS 1.4057 | 0.12-0.22 | 1.00 max | 1.50 max | 0.040 max | 0.015 max | 15.50-17.00 | 1.50-2.50 | 2.00-2.50 | Rem |
| DIN X 17 CrNi 16-2 | 0.12-0.22 | 1.00 max | 1.50 max | 0.040 max | 0.015 max | 15.50-17.00 | 1.50-2.50 | 2.00-2.50 | Rem |
|
AFNOR X17Cr Ni 16-2 |
|||||||||
| AISI 431 ~ | 0.12-0.22 | 1.00 max | 1.50 max | 0.040 max | 0.015 max | 15.50-17.00 | 1.50-2.50 | 2.00-2.50 | Rem |
|
Chronifer M-4057 material is Manufactured in Rod, Bar and coil AISI 431 Stainless Steel without Sulphur
Material Properties AISI 431 has a better corrosion resistance (after hardening and polishing of the parts) then the 420 or 420F because of low carbon and sulfur content, plus so percentage of Nickel and Molybdenum.
Availability Bars: cold drawn, ground and polished Bars Length: 3m surface roughness N5-N6
Standard Tolerances Diameter ISA h7 Length of bars: +50/-0 mm Out of roundness/eccentricity: 1/2 of diameter tol.
Heat Treatment Hardening: 950-1050 C Soft annealing: 600-800C Max obtainable hardness 47 HRC
Cutting rate 20-30 m/min (approximate value, depending on the lubrication, the cutting tools, the shape of parts)
Stock Range: Ø 3.00-8.00 mm round full material in stock, other dimensions on request |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Surplus Stock Online at 4metal.co.uk
Sales Enquires : sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK
Tel: 44(0)1844 275560 Fax: 44(0)1844 346892
Group companies Quantum Alloys Ltd