Happy Christmas Christmas Opening Times
We will close on Fri 21st Dec at 4pm and reopening on Wed 2nd Jan
Happy Christmas

Nickel Aluminium Bronze AMS 4880 (UNS C95510)

Technical Data Sheet

Chemical Composition Limits
Weight % Cu Al Fe Mn Ni Sn Zn
AMS 4880
78.0 min 9.7 - 10.9 2.0-3.5 1.50 4.5-5.5 0.20 0.30

AMS 4880 is one of the most popular landing gear bushing materials specified today along with C63000 material. This continuous / centrifugal cast alloy is heat treated and exhibits high mechanical strength which meets the properties of C63000 (AMS 4640). In many cases C95510 (AMS 4880) can be substituted for C63000 with the advantage of this material being available in tube form, which provides economic cost savings for you, the customer.

Typical Mechanical Properties


Tensile Strength ksi

Yield Strength ksi Elongation 4D %
AMS 4880 separately cast coupons 105 62.5 9

Physical Properties - AMS 4880 Nickel Aluminium Bronze
Melting Point - Liquidus - 1930 F
Melting Point - Solidus - 1900 F
Density - 0.272 lb/in 3 at 68 F
Specific Gravity - 7.53
Electrical Resistivity - 122.8 ohms-cmil/ft @ 68 F
Electrical Conductivity - 8.5 %IACS @ 68 F
Thermal Conductivity - 24.2 Btu · ft/(hr · ft2· o F)at 68F
Coefficient of Thermal Expansion - 9.0 ·10 -6 per o F (68-572 F)
Specific Heat Capacity - 0.1 Btu/lb/o F at 68 F
Modulus of Elasticity in Tension - 16000 ksi
Magnetic Permeability - 1.2
Machinability Rating - 50

Nickel Aluminium Bronze
Sizes available: AMS 4880
SOLID BAR 1/2" - 12" diameter
For all other stock availability contact Sales.


Continuous Cast
ASTM B-505
AMS 4880
SAE J461, J462
Centrifugal Cast
ASTM B-271
AMS 4880
SAE J461, J462

Typical Uses of 4880 Nickel Aluminium Bronze
Aerospace - Landing Gear Bushings & Bearings, Valve Guides, Stems,and Seats
Other Industrial - Corrosion Resistant Parts, Wear Rings, Machine Tool Parts,Piston Guides, Worm Wheels, Hot Mill Gurdes
Marine - Propeller Hubs, Wear Rings, Hardware, Worm Gears, Shafts, Sleeves.


More News ........ Cutting Capabilities Expanded
We have a brand new 3 metre Guillotine. Take a look:
Aircraft Materials Metal Cutting Durma VS 3006



Join our Mailing List

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.