Happy Christmas Christmas Opening Times
We will close on Fri 21st Dec at 4pm and reopening on Wed 2nd Jan
Happy Christmas

Aluminium Alloy 5154

Technical Data Sheet


Chemical Composition Limits
Weight% Al Si Fe Cu Mn Cr Mg Mn +Cr Ti Zn Others Each Others Total
5154 USA Bal 0.25 max 0.40 max 0.10 max 0.10 max 0.15/0.35 3.1/3.9 - 0.20 max 0.20 max 0.05 max 0.15 max
5154 A
Bal 0.5 max 0.5 max 0.10 max 0.50 max 0.25 max 3.10 / 3.9 0.10 / 0.50 0.20 max 0.20 max 0.05 max 0.15 max

Aluminium Alloy 5154 primary constituent is magnesium which gives this non heat treatable alloy its moderate strength. Alloy 5154 combines its strength with excellent formabiltiy and corrosion resistance and is regularly used in wire form but is now becoming popular for use with cold heading applications, specifically in solid, semi-tubular and tubular rivets. Alloy 5154 is an all purpose alloy that meets a broad range of needs.

Typical Mechanical Properties


Material Temper Wall Thickness (mm) Tensile Strength (N/mm²) Yield Strength (N/mm²) mm Elongation on 50mm
5154 Drawn tube 0 <10 215-260 85 16
5154 Drawn tube H4 <10 245 min 200 4

Alloy 5154( 5154a) is available in Plate, Sheet, Strip, Tube, Forging Stock, Rivet Stock, Bar and Wire. Alloy 5154A tube is available in many sizes from stock, however there is a minimum production of 30m. For all stock availability of Aluminium Alloy 5154 contact Sales.

Alloy 5154 A Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Similar Specifications:
Alcan GB-54S
BA 27


More News ........ Cutting Capabilities Expanded
We have a brand new 3 metre Guillotine. Take a look:
Aircraft Materials Metal Cutting Durma VS 3006



Join our Mailing List

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.