Aluminium Alloy 5083


Technical Data Sheet

 

Chemical Composition Limits
Weight% Al Si Fe Cu Mn Cr Mg Ti Zn Other Each Others Total
5083 Bal 0.40 max 0.40 max 0.10 max 0.40 / 1.0 0.05 / 0.25 4.0 / 4.90 0.15 max 0.25 max 0.05 max 0.15 max

 

Typical Mechanical Properties

 

Material Temper Tensile Strength (ksi) min Yield Strength (ksi) min Elongation % in 2"
5083 Extruded Bar
(<5" diameter)
0 39 16 14
5083 Extruded Bar
(<5" diameter)
H111 40 24 12
5083 Extruded Bar
(<5" diameter)
H112 39 16 12

Availability
Alloy 5083 is available in Plate, Sheet, Strip, Forging Stock, Tube and Bar. Alloy 5083 tube is available in many sizes from stock, however there is a minimum production of 30m. For all stock availability of Aluminium Alloy 5083 contact Sales.

Alloy 5083 Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Specifications
Similar Specifications:
BS N8
Alcan GB-B54S
Alcoa-505
BA 281
Hiduminium-05
Peraluman-460
Birmabright-BB4
QQ-A-200/4
QQ-A-250/6

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.