Aluminium Alloy 1350


Technical Data Sheet

 

Chemical Composition Limits
Weight% Si Fe Cu Mn Mg Cr Zn B Ga V+T Cr+Mn+Ti+V Others
1350 0.1 0.40 0.05 0.01 - 0.01 0.05 0.05 0.03 0.02 - 0.03 (each)
0.10 (total)
1350A
Germany
0.25 0.40 0.02 - 0.05 - 0.05 - - - 0.03 0.03 (each)

Aluminium Alloy 1350 has the minimum aluminium content of 99.5 %. Alloy 1350 is a non-heat treatable and is the alloy of choice for electrial condutors. This alloy has excellent formability and corrosion resistance. Alloy 1350 is used in various applications but its main uses are electrical conductors pins, rods, and rivets. This alloy can also be found in various wire form and clips where strength is not as important as economics. NB: 1350 has a tigher chemistry specification and is therefore often used in stead of 1050A.

Typical Mechanical Properties

 

Material Temper Tensile Strength (N/mm²) Elongation in 50mm
1350 Bar M 60 min 23
1350 Bar H2 85 (min) 13

Availability
Aluminium Alloy 1350 available in Bar, Drawn Strip, Wire and Solid Conductor. For all stock availability for Aluminium 1350 contact Sales.

Specifications
Similar Specifications:
BS 1E
Al 99.5
AWCO-EP
Duricilium-T (Elect.)
Hiduminium-1BE
Star-99.5E
BS 2897
BS 2898

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.