Non-Corrosion Resisting Alloy 4S14


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Si Mn P+S max Ni Limited Ruling Section
4S14 0.10-0.15 0.10-0.35 0.40-0.70 0.040 0.30 max 13mm
4S14 0.10-0.18 0.10-0.35 0.60-1.00 0.040 0.30 max 13-19mm
Chemically similar British Specifications BS.970 Pt3
Weight% C Si Mn P+S max Others
045M10
(EN32A)

0.07-0.13 0.10-0.40 0.30-0.50 0..050 -
060A15 0.13-0.18 0.40 max 0.50-0.70 0.050 -
080A15 0.13-0.18 0.40 max 0.70-0.90 0.050 -
080M15
(EN32C)
0.12-0.18 0.10-0.40 0.60-1.00 0.050 -
Other Chemically similar Specifications
Weight% C Si Mn P+S max Others
AFNOR CC10 0.05-0.15 0.30 max 0.30-0.60 0.040 -
AFNOR CC12 0.06-0.18 0.30 max 0.40-0.70 0.050 -
AISI 1012 / SAE 1012 0.10-0.15 0.10 max 0.30-0.60 P 0.040
S 0.050
-
AISI 1016 / SAE 1016 0.13-0.18 0.15-0.30 0.60-0.90 P 0.040
S 0.050
-
MIL-S-16974E-1 0.13-0.18 0.30 max 0.30-0.60 P 0.040
S 0.050
-
MIL-S-16974E-2 0.11-0.20 0.30 max 0.30-0.60 P 0.040
S 0.050
-
MSRR 6064 - - - - -
WS 1.1144 - - - - -
WS 1.0301 0.07-0.13 0.15-0.35 0.30-0.60 0.045 -
WS 1.0401 0.12-0.18 0.15-0.35 0.30-0.60 0.045 -


Typical Mechanical Properties

 

Grade Tensile Strength (tonf/in) Rp 0.2 Yield Strength (tonf / in² ) ElongationA% on 5.65 √50 Ruling Section
S14 HT 35 - 13 1/2" - 3/4"

Availability
Alloy 4S14 is available in Bar. For all stock availability contact Sales.

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.