Corrosion Resisting Alloy 4S80 / 5S80 / 6S80 / 7S80
Technical Data Sheet
| Chemical Composition Limits | |||||||
| Weight% | C | Si | Mn | P+S max | Cr | Ni | Others (max) |
| 4-S80 5-S80 6-S80 7- S80 Bar |
0.12-0.20 | 1.00 max | 1.00 max | P 0.030 S 0.025 |
15-18 | 2-3 | Mo 0.3 / Co 0.05 / Cu 0.3/ Nb 0.05 / Sn 0.02 / Ti 0.05 / V 0.20 / W 0.05 |
| Chemically similar British Specifications BS.970 Pt4 431 S29 (EN57) | |||||||
| Weight% | C | Si | Mn | P+S max | Cr | Ni | Others (max) |
| 431S29 (EN57) | 0.12-0.20 | 0.80 max | 1.00 max | P 0.040 S 0.030 |
15-18 | 2-3 | - |
| Other Chemically similar Specifications | |||||||
| Weight% | C | Si | Mn | P+S max | Cr | Ni | Others (max) |
| AISI 431 SAE - 51431 | 0.20 max | 1.00 max | 1.00 max | P 0.040 S 0.030 |
15-17 | 1.25-2.5 | - |
| AMS 5628D | 0.12-0.17 | 0.20-0.60 | 0.30-0.80 | P 0.040 S 0.030 |
15.50-17 | 2-3 | Mo 0.50 / Cu 0.50 / N 0.10 |
| MIL-S-86213 431 |
0.20 max | 1.00 max | 1.25 max | P 0.040 S 0.030 |
15-17 | 1.25-2.5 | - |
| MIL-S-8967 (ASG) |
0.13-0.17 | 0.20-0.60 | 0.30-0.80 | 0.025 | 15.50-16.50 | 2-3 | Mo 0.25 |
| MIL-S-187320 | 0.13-0.17 | 0.20-0.60 | 0.30-0.80 | P 0.040 S 0.030 |
15.50-16.50 | 2-3 | Mo 0.25 / N 0.10 |
| MSRR 6573 | - | - | - | - | - | - | - |
| Z15 CN17-03 | - | - | - | - | - | - | - |
| BACM 85 | - | - | - | - | - | - | - |
| WS 1.4044 | - | - | - | - | - | - | - |
| WS 1.4057 XX22CrNi17 |
0.15-0.23 | 1.00 max | 1.00 max | P 0.045 S 0.030 |
16-18 | 1.50-2.50 | - |
| UNI X16CrNi16 | 0.10-0.20 | 1.00 max | 1.00 max | P 0.040 S 0.030 |
15-17 | 1.50-2.5 | - |
BS 7S80 is the British aerospace standard for 431 stainless steel. Designed to combine good corrosion resistance and high mechanical properties after heat treatment, it is used widely used in aerospace and defence applications. The grade is generally supplied in the hardened and tempered condition, designation S80D.
Typical Mechanical Properties
| Grade | Treatment | Tensile Strength Rm N/mm² | Proof Stress Rp 0.2, N/mm² | Elongation A% √5.65 % | IZOD Impact FT/ Lbs | Hardness HB | Ruling Section | Product Range | Colour Code |
| 6S80 | HT | 880/1080 | 690 | 12 | 25 | 255-321 | 2.5" | Round Square Flat Hexagon |
Brown Black Red |
| 7S80D | HT | - | - | - | 15 | - | 2.5-4" |
Availability
Alloy S80 is available in Bar and Rod. For all stock availability contact Sales.
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Stock Online at 4metal.co.uk
