Non-Corrosion Resisting Alloy 4S14
Technical Data Sheet
| Chemical Composition Limits | ||||||
| Weight% | C | Si | Mn | P+S max | Ni | Limited Ruling Section |
| 4S14 | 0.10-0.15 | 0.10-0.35 | 0.40-0.70 | 0.040 | 0.30 max | 13mm |
| 4S14 | 0.10-0.18 | 0.10-0.35 | 0.60-1.00 | 0.040 | 0.30 max | 13-19mm |
| Chemically similar British Specifications BS.970 Pt3 | ||||||
| Weight% | C | Si | Mn | P+S max | Others | |
| 045M10 (EN32A) |
0.07-0.13 | 0.10-0.40 | 0.30-0.50 | 0..050 | - | |
| 060A15 | 0.13-0.18 | 0.40 max | 0.50-0.70 | 0.050 | - | |
| 080A15 | 0.13-0.18 | 0.40 max | 0.70-0.90 | 0.050 | - | |
| 080M15 (EN32C) |
0.12-0.18 | 0.10-0.40 | 0.60-1.00 | 0.050 | - | |
| Other Chemically similar Specifications | ||||||
| Weight% | C | Si | Mn | P+S max | Others | |
| AFNOR CC10 | 0.05-0.15 | 0.30 max | 0.30-0.60 | 0.040 | - | |
| AFNOR CC12 | 0.06-0.18 | 0.30 max | 0.40-0.70 | 0.050 | - | |
| AISI 1012 / SAE 1012 | 0.10-0.15 | 0.10 max | 0.30-0.60 | P 0.040 S 0.050 |
- | |
| AISI 1016 / SAE 1016 | 0.13-0.18 | 0.15-0.30 | 0.60-0.90 | P 0.040 S 0.050 |
- | |
| MIL-S-16974E-1 | 0.13-0.18 | 0.30 max | 0.30-0.60 | P 0.040 S 0.050 |
- | |
| MIL-S-16974E-2 | 0.11-0.20 | 0.30 max | 0.30-0.60 | P 0.040 S 0.050 |
- | |
| MSRR 6064 | - | - | - | - | - | |
| WS 1.1144 | - | - | - | - | - | |
| WS 1.0301 | 0.07-0.13 | 0.15-0.35 | 0.30-0.60 | 0.045 | - | |
| WS 1.0401 | 0.12-0.18 | 0.15-0.35 | 0.30-0.60 | 0.045 | - | |
Typical Mechanical Properties
| Grade | Tensile Strength (tonf/in) | Rp 0.2 Yield Strength (tonf / in² ) | ElongationA% on 5.65 √50 | Ruling Section |
| S14 HT | 35 | - | 13 | 1/2" - 3/4" |
Availability
Alloy 4S14 is available in Bar. For all stock availability contact Sales.
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Stock Online at 4metal.co.uk
