Non-Corrosion Resisting Steel 2S93


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Si Mn P+S max
2S93 0.35-0.45 0.15-0.35 0.60-0.90 0.040 max
Chemically similar British Specifications BS.970 Pt1
Weight% C Si Mn P+S max
060A37 0.35-0.40 - 0.50-0.70 0.050 max
080M36 0.32-0.40 - 0.60-1.00 0.050 max
080A37 EN8B 0.35-0.40 - 0.70-0.90 0.050 max
080M40 0.36-0.44 - 0.60-1.00 0.050 max
2S113 0.35-0.45 0.10-0.35 0.60-0.90 0.040 max
Other Chemically similar Specifications
Weight% C Si Mn P+S max
AFNOR CC45 0.40-0.50 0.10-0.40 0.50-0.80 0.040 max
AISI 1038 / SAE 1038 0.35-0.42 0.15-0.30 0.60-0.90 P 0.040
S 0.050
AISI 1040 / SAE 1040 0.37-0.44 0.15-0.30 0.60-0.90 P 0.040
S 0.050
AMS 5080E 0.31-0.38 0.15-0.30 0.60-0.90 P 0.040
S 0.050
MIL-S-1697E 1040-1 0.37-0.44 0.15-0.30 0.60-0.90 P 0.040
S 0.050
MIL-S-1697E 1040-2 0.34-0.45 0.15-0.30 0.60-0.90 P 0.040
S 0.050
WS 1.0503 C45 0.42-0.50 0.15-0.35 0.50-0.80 0.045 max


Typical Mechanical Properties

 

Grade Treatment Tensile Strength Rm tonf/in² Proof Stress Rp 0.2, tonf/in² Elongation in 5.65 √Cross Sectional Area% Hardness HB Ruling Section
2S93 Normalised 35-45 20 15 152-217 4"-6"
2S93 - 35-45 20 15 152-217 4"

Availability
Alloy S93 is available in Bar . For all stock availability contact Sales.

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.